Aluminum Connection Steel Partition Cleanroom Wall Panel System

Home » Products » Cleanroom Wall Panel System » Aluminum Connection Steel Partition Cleanroom Wall Panel System
Aluminum Connection Steel Partition Cleanroom Wall Panel System Aluminum Connection Steel Partition Cleanroom Wall Panel System Aluminum Connection Steel Partition Cleanroom Wall Panel System

MAX-CR-A 50 aluminum connection steel partition cleanroom wall panel system which mainly adopts the baking finish steel plate of low dust content, is well applied to the electronic or pharmaceutical clean room. Particularly, it is well applied in all the pharmaceutical clean rooms of ISO standard from CLASS 1 to CLASS 9. In addition, our product is in full compliance with the FDA, EV and the requirements of the new edition GMP in China. It provides the fire protection of up to one hour. With the modularized auxiliary link structure, this product can be instantly installed to get with any complicated working environment. All the parts excluding ceiling rail, floor rail or doors can be fixed without screws. Manufactured with the modular system, MAX-CR-A or CRA series comes with high quality, preventing secondary pollution of the construction site. Therefore, it is particularly applicable for the construction of ISO CLASS 3 clean room. Moreover, our aluminum connection steel partition cleanroom wall panel system is also applicable for common office decoration when being made of steel skin panel or aluminum skin panel.

Since it was launched into the market in 2001, our economical MAX-CR-A 50 aluminum connection steel partition cleanroom wall panel system not only has a good application in China, but also sells well in areas including East Asia, Middle East, West Europe, and so on.

Materials and Performance Table
No. The Name of Parts Name Material & Surface Treatment
1 Exposed Accessory Material Ceiling Track Aluminum profile, qualified baking varnish, T=1.5mm
2 Floor Track Aluminum profile, qualified baking varnish, T=1.5mm
3 Edge Aluminum profile, qualified baking varnish, T=1.5mm
4 Internal Accessory Material Built-in aluminum material Aluminum profile
5 Materials used for window fastening Aluminum profile
6 Door, window, glass Door frame Aluminum profile, qualified baking varnish, T=3mm
7 Window frame Aluminum profile, qualified baking varnish, T=1.5mm
8 Door The pressing between the color plate and lining material
9 Lining material Paper honeycomb, aluminum honeycomb, rock wool (one hour fire protection), etc.
10 Fastenings Self tapping screw, expansion pipe, gunpowder nails
Panel Structure Illustration
Material Name
1 Color baking varnish hot-dip galvalume steel plate Panel
2 Hot dip aluminum, T-galvanized steel sheet, T=0.8mm Frame
3 Rock wool, paper honeycomb, aluminum honeycomb, etc. Filling materials
4 Polyurethane adhesive Adhesive

Plate Structure Features
The plate manufactured with the customized special-purpose machinery has high intensity for its pioneered panel reinforced structure. It is suitable for MAX-CCR-A 50 series wallboard and MAX-CR-B 100 series partition plate.

As compared to the one with the right-angle side molding, our MAX aluminum partition wall panel with triangle side molding is higher in intensity and strongly resists bending and deformation. In addition, our panel can be quickly assembled. Its width modulus could be 900mm, 1200mm, or 1160mm, and the length modulus is no more than 6000mm. Commonly, the filling materials include rock wool with the density of 120K, paper honeycomb, and aluminum honeycomb.

1. Unique Reinforced Structure - Triangle
2. Triangle Side Molding
1. Modular Assembly of the Double Windows
2. Panel    3. Steel Door
Modular Combination
MODEL MAX-CR-A1 MAX-CR-A2 MAX-CR-A3
Connection Rendering
General Physical Performance Wall Thickness 50mm, 100mm 50mm, 100mm 50mm, 100mm
Conventional Width 900mm,1160mm,1200mm 900mm, 1160mm, 1200mm 900mm, 1160mm,1200mm
Max. Length 6000mm 6000mm 6000mm
Main Material Panel Material Painted galvanized steel sheet Painted galvanized steel sheet Painted galvanized steel sheet
Filling Material Paper honeycomb, aluminum honeycomb, rock wool, magnesium oxide, etc. Paper honeycomb, aluminum honeycomb, rock wool, magnesium oxide, etc. Paper honeycomb, aluminum honeycomb, rock wool, magnesium oxide etc.
Connection Aluminum alloy extrusion, 2mm gap Aluminum alloy extrusion, 18mm gap Aluminum alloy extrusion, 10mm gap
Fire Resistance 60min fireproofing 24min fireproofing 24min fireproofing
Applicable Place Electronic clean room, pharmaceutical clean room, operating room, office partition, etc. Electronic clean room, pharmaceutical clean room Kinds of office partitions and functionality decorations
Diversified Panel Points
The Panel Point between the Wall and Floor

The third adjustable aluminum alloy floor rail is ideal for use in the bio-pharmaceutical plant, for heights up to 60mm or 100mm. Generally, the floor rail with the height of 60mm is recommended for the PVC terrace, and the one which is 100mm high is proposed for the epoxy terrace.

Corner Panel Point
Corner One Corner Two Corner Three Corner Four
Corner One Corner Two Corner Three Corner Four

The Openable Bead Angle
The openable bead angle features smooth transition when being connected to the wallboard. It requires low cost and can be easily cleaned. The cover board should be installed when there are a few construction workers or the protection for the finished products is not good enough.

Corner Five
The followings are MAX standard corners like Corner Three, Corner Four and Corner Five, all of which are strongly recommended for the bio-pharmaceutical factory. Corner Three is most expensive and the Corner Five is the cheapest. Both Corner Three and Corner Five are made of aluminum alloy, having no fireproof limitation. Corner Four made of steel plate comes with the highest fireproof limitation and the best air tightness performance. Moreover, as the MAX patented product, Corner Five features outstanding maintainability.
Corner Five is the MAX patented product which is extremely outstanding in maintainability. Prior to the installation, you have to install the lining material. After the program is finished, then you can install the circular cover, thus greatly avoiding the damage of the finished circular corner.
The Small Plug-in Aluminum Alloy Corner
Plug-in small aluminum alloy corner which requires low cost is extensively applied to both electronic and pharmaceutical plant.
The Internal and External Angle System with the Bolt

Ceiling panel and metal wall panel, both of which could be 50mm, 80mm, or 100mm thick, are available based on clients' requirements. Plasterboards or glass magnesium boards are optional for enhancing the intensity and fireproof limitation.

We are a China-based aluminum connection steel partition cleanroom wall panel system manufacturer and supplier. In addition to cleanroom wall panel system, we also offer load bearing ceiling system, double layer glass window, clean room door, and more.

Feedback Form
Other Products